Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

PPP not forming on Serial Line

Hi,

We have 3745 series router on which we have chnnelised E1 controller with 30 64 kbps links leased lines . These links are up and working with HDLC encapsulation. But when we are trying to encapsulate few of links in ppp , protocol is not comig up. Is it necessary that all 64 kbps links must b eencapsulated with ppp ?

when we check show cdp ne , we see that it has found a cisco router of other side of lease line.

Has it anything to do with IOS of both side routers.

Any link on cisco.com is appreciated.

Thanks in aadvance

Subodh

1 REPLY
Bronze

Re: PPP not forming on Serial Line

If you are able to see CDP neighbors it means layer 2 is up because CDP acts on layer 2.For troubleshooting PPP

http://www.cisco.com/warp/public/112/chapter17.htm#troubleshootingppp

110
Views
0
Helpful
1
Replies
CreatePlease to create content