10-10-2005 08:20 PM - edited 03-03-2019 10:42 AM
Hi
can I configure ppp over FR physical interface, not point-to-point subinterface.
thanks
10-10-2005 09:49 PM
Hello,
I tested PPPoFr with the following configuration and got it working without any problems.
RouterA
!
interface Serial0
no ip address
encapsulation frame-relay
frame-relay interface-dlci 102 ppp virtual-template1
!
interface Virtual-Template1
ip address 160.12.12.1 255.255.255.252
RouterB
!
interface Serial0
no ip address
encapsulation frame-relay
frame-relay interface-dlci 201 ppp virtual-template1
!
interface Virtual-Template1
ip address 160.12.12.2 255.255.255.252
Are you running into trouble with your config or do you just want to know if it is possible to configure it on physical interfaces ?
Regards,
GP
10-10-2005 10:06 PM
thanks alot,, i just want to know..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide