Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PPP over FR

Hi

I have a very simple configureation with PPP over FR, and runing RIP on it. there are two routes about this subnet in routing table like 150.1.1.1/32 and 150.1.1.0/24 both exist in routing table. can i fix this problem?

thanks

3 REPLIES
VIP Purple

Re: PPP over FR

Hello,

can you post the configuration of your PPPoFR router ?

Regards,

GP

New Member

Re: PPP over FR

hi GP,

Currently, i dont have configuration, but it was simple, joging my memory a little bit.

A

int s0/0

frame-realy encapsulation

no frame-relay inver-arp

int virtual-template 1

ip address 150.1.1.1 255.255.255.0

ip rip triggerd

router rip

version 2

no auto-summary

network 150.1.0.0

B

int s0/0

frame-realy encapsulation

no frame-relay inver-arp

int virtual-template 1

ip address 150.1.1.2 255.255.255.0

ip rip triggerd

router rip

version 2

no auto-summary

network 150.1.0.0

thanks

VIP Purple

Re: PPP over FR

Hello,

this is just a guess, but possible, the virtual template interface is trying to install a peer route to the neighbor. Try and configure 'no peer neighbor-route' on the Virtual-Template, and see if that makes a difference...

Regards,

GP

118
Views
5
Helpful
3
Replies
CreatePlease to create content