PPPoE Clients

[mahadhema]

We're planning to provide a new service to our Internet clients using PPPoE.

We will implement a RADIUS server for authentication, PPPoe router will be installed at the custmer site.

my question is that, how can we direct the PPPoE traffic to the RADIUS server? is this can be achived using Application-based VLAN

[aghaznavi]

PPPoE provides the ability to connect a network of hosts over a simple bridging access device to a remote access concentrator. PPPoE can allow direct connection to cable interfaces. The support of PPPoE on cable interfaces of the Cisco uBR7100 and uBR7200 series routers allows Customer Premises Equipment (CPE) behind the cable modem to use PPP as a mechanism to get their IP addresses and use it for all subsequent data traffic, similar to a dial-up PPP client.For more refer the following URL

http://www.cisco.com/en/US/tech/tk86/tk808/technologies_configuration_example09186a008019e120.shtml