Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

pppoe enable in 12.4(15)T

When using SDM to configure Cisco871, I have found I am unable to configure the pppoe encapsulation. I found the reason - the router rejects interface configuration command "pppoe enable" since versions 12.4(15)XY4 and 12.4(15)T7. Previous version can be configured using SDM without problem, and I could not test higher versions due to flash size. Have you similar experience?

  • WAN Routing and Switching
1 REPLY
Silver

Re: pppoe enable in 12.4(15)T

PPPoE Client in Cisco IOS Release 12.2(13)T and Later Releases

In Release 12.4(15)T

The following commands are new or modified for this feature:

• pppoe-client dial-pool-number

This command was integrated into Cisco IOS Release 12.4(15)T and PPPoE client functionality was modified to support multiple clients on a single ATM PVC.

For further information click this link.

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t15/mpppoec.html

170
Views
0
Helpful
1
Replies
This widget could not be displayed.