pppoe max sessions

[hemoon123]

what is the command so i can view what my pppoe max sessions are?  For some reason we cannot get more than 55.

Thank You

Kevin                  

[hemoon123]

I dont believe i worded this correctly.  is there a show command that will let me view what my pppoe max sessions is set at?  These are my router specs.

Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(21a), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 09-Jan-04 16:35 by kellmill
Image text-base: 0x60008940, data-base: 0x61308000

ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2)

cisco 7206VXR (NPE400) processor (revision B) with 245760K/16384K bytes of memory.

Processor board ID 32347585

R7000 CPU at 350Mhz, Implementation 39, Rev 3.3, 256KB L2, 4096KB L3 Cache

6 slot VXR midplane, Version 2.8 cisco 7206VXR (NPE400) processor (revision B) with 245760K/16384K bytes of memory.

Thanks

Kevin

[paul driver]

Hello

This is one i will need to look up but try

sh pppoe summary



Sent from Cisco Technical Support Android App

[hemoon123]

Thanks for the response, but that command doesnt work.  The response is below

Router#sh pppoe summary

                        ^

% Invalid input detected at '^' marker.

Kevin

[paul driver]

Hello
Try these

Sh pppoe session
Sh pppoe statics
Sh vpdn session



Sent from Cisco Technical Support Android App

[hemoon123]

show vpdn sessions, showed me a list of many people were on, but didnt tell me what my max sessions was set at

[hemoon123]

Found it.  Thanks for all the help.  Did the show configuration command, and found what my pppoe max sessions were.