Hmm, that's strange. What is the exact router's type and IOS version please? Do you have another ADSL modem/router to try to connect to the very same line and see whether it is able to connect successfully?
Do you have an option of capturing the traffic exchanged between the 1841 and your core router? Having a close look at the PPPoE packets could reveal more what is going on. The debugs use only abbreviated output which does not contain the entire packet contents.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...