Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

pri-group command not available

Hi,

I would like to know why the pri-group command is not available under the controller xx submenu of my 2600XM router. It is running the following IOS c2600-advipservicesk9-mz.123-26.bin and have a VWIC-1MFT-G703 card.

Thanks a lot for your help.

3 REPLIES
Hall of Fame Super Gold

Re: pri-group command not available

Hi, for data only pri on the vwic, you can try with an non-voice image, else the recommended card is nm-xce1/t1.

New Member

Re: pri-group command not available

I tried first with a ipbase image but I've got the same result. Moreover the pri-group command is available with the same card on 1841 platform.

Hall of Fame Super Gold

Re: pri-group command not available

The 1841 is very different. On the 2600 the only way to have data pri is the nm mentioned, or a the vwic in a nm-hdv with codecs.

170
Views
0
Helpful
3
Replies