Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

private MIB: OID for Cisco RTR or IP SLA

Hello,

my router has the following configuration:

access-list 20 permit 10.10.10.10

snmp-server view Test mib-2.* included

snmp-server view Test ciscoMgmt.13 included

snmp-server community password view Test RO 20

rtr responder

rtr 11

type tcpConnect dest-ipaddr 10.20.20.20 dest-port 3111 source-ipaddr

10.30.30.30 source-port 12277 control disable

rtr schedule 11 life forever start-time now

Now, I want to give the server 10.10.10.10 the right, to read via SNMP the

RTR results.

Which SNMP value do I have to add, that the server can do that?

Is that the right configuration?

<<< snmp-server view Test rttMonStats.11 included >>>

Thanks a lot, Christian

If needed, the <sh rtr configuration>

SA Agent, Infrastructure Engine-II

Entry number: 11

Owner:

Tag:

Type of operation to perform: tcpConnect

Target address: 10.20.20.20

Source address: 10.30.30.30

Target port: 3111

Source port: 12277

Operation timeout (milliseconds): 60000

Type Of Service parameters: 0x0

Control Packets: disabled

Operation frequency (seconds): 60

Next Scheduled Start Time: Start Time already passed

Group Scheduled : FALSE

Life (seconds): Forever

Entry Ageout (seconds): never

Recurring (Starting Everyday): FALSE

Status of entry (SNMP RowStatus): Active

Threshold (milliseconds): 5000

Number of statistic hours kept: 2

Number of statistic distribution buckets kept: 1

Statistic distribution interval (milliseconds): 20

Number of history Lives kept: 0

Number of history Buckets kept: 15

History Filter Type: None

Enhanced History:

410
Views
0
Helpful
0
Replies