Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Problem DMZ to Inside and Inside to DMZ

Dear All,

Please help me, i would like to configure ASA 5510.and i had DMZ , i want DMZ can access to inside and Inside can access to DMZ, but now it doesn't work.

Pleas see configuration in the attach file.

Best Regards,

Rechard,

3 REPLIES
Hall of Fame Super Blue

Re: Problem DMZ to Inside and Inside to DMZ

Hi Rechard

Not sure what the static statements are doing

static (inside,dmz) 192.168.4.0 192.168.3.0 netmask 255.255.255.0

static (dmz,inside) 192.168.3.0 192.168.4.0 netmask 255.255.255.0

You only need a static for traffic from a lower to a higher level interface. Can you remove the above 2 statements, do a "clear xlate" and then add

static (inside,dmz) 192.168.3.0 192.168.3.0 netmask 255.255.255.0

and then retry.

HTH

Jon

New Member

Re: Problem DMZ to Inside and Inside to DMZ

Dear Jon,

it still has the problem ,

Please see in the attach file.

Best Regards,

Rechard,

New Member

Re: Problem DMZ to Inside and Inside to DMZ

hi,Rechard

please change ip address block of DMZ from 192.168.3.0 to 192.168.4.0

static (inside,dmz) 192.168.4.0 192.168.3.0 netmask 255.255.255.0

regards

dongdong

103
Views
5
Helpful
3
Replies
CreatePlease to create content