Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Problem in AS5300 IOS updating

hi

I have problem . i m uploading IOS via Ronmon but error are as follow.

Frist status is :::

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

loadprog: error - trouble reading file magic number

open: failed to find and/or load the bootloader: "bootflash:c5300-js-mz.123-15.b

in"

loadprog: error - on file open

boot: cannot load "cisco2-AS5300"

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

loadprog: error - trouble reading file magic number

boot: cannot load "bootflash:"

System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

AS5300 platform with 131072 Kbytes of main memory

and mem info is :::::::::

rommon 1 > meminfo

Main memory size: 128 MB. Packet memory size: 16 MB

Available main memory starts at 0xa000e000, size 0x7ff2000

Packet memory starts at 0xa8000000

NVRAM size: 0x20000

when I run commond Xmodem than errors comes

1) transfer canceled by remote system.

and 2nd ::::::::::::

modem c5300-is-mz.122-17.bin

Do not start the sending program yet...

File size Checksum File name

0 bytes (0x0) 0xffff c5300-js-mz.123-15.bin

WARNING: All existing data in bootflash will be lost!

Invoke this application only for disaster recovery.

Do you wish to continue? y/n [n]: y

Ready to receive file c5300-is-mz.122-17.bin ...

BB0

ERR:Image size exceeds free flash space

rommon 3 >

plz check the thing and advice.

Thanks

3 REPLIES
Silver

Re: Problem in AS5300 IOS updating

You are trying to load an image that is to large for your flash filesystem. Try another image, upgrade your flash memory or boot via TFTP.

HTH

Leon

* Please rate useful posts.

Hall of Fame Super Gold

Re: Problem in AS5300 IOS updating

I believe that this message:

WARNING: All existing data in bootflash will be lost!

indicates that he is trying to copy an image file into bootflash rather than into flash. He should load a valid boot image into bootflash, and then try to get his image into flash.

HTH

Rick

New Member

Re: Problem in AS5300 IOS updating

Hi

Thanks for the reply !!!!

I have tried three different images but the result is same.

i am Uploading IOS through xmodem (console) ... so is there any other solution excpet TFTP.

waiting for your advise.

Thanks

111
Views
0
Helpful
3
Replies
CreatePlease to create content