Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem in Router 1841 - Route-map function

hi , everybody

please help me in cause,in my school has 2 adsl [dynamic IP from ISP] i connect 2 line into my router [R1841+2WIC-ADSL] my config in file.

if 2 link is normal, everything is good but

in case when link 1 down, service in route-map on link 1 [every service not include ftp] it not take to link 2 , by the way in case link 2 down, service in route-map on link 2 [ftp only] it not take to link 1

please help me because now internet in my school slow for tranfer homework of student.

Thank you so much.

6 REPLIES
Silver

Re: Problem in Router 1841 - Route-map function

can you send the output of show policy-map interface x/x

regards

shivlu

New Member

Re: Problem in Router 1841 - Route-map function

JS#sh policy-map interface

JS#

it's not appear.

JS-Siam#sh policy-map interface fa0/0

JS-Siam#

same not appear.

New Member

Re: Problem in Router 1841 - Route-map function

some msg in "debug policy"

*Feb 25 09:04:15.282: IP: s=192.168.0.201 (FastEthernet0/0), d=64.233.189.104 (Dialer0), len 40, FIB policy routed

*Feb 25 09:04:15.282: IP: s=192.168.0.201 (FastEthernet0/0), d=64.233.189.104, len 40, FIB policy match

*Feb 25 09:04:15.282: fibidb->namestring: Dialer0

*Feb 25 09:04:15.282: ipfib_policy_set_interface_lookup: tag_ptr: 0x0

*Feb 25 09:04:15.282: adj 0x0, NULL

*Feb 25 09:04:15.282: IP: s=192.168.0.201 (FastEthernet0/0), d=64.233.189.104 (Dialer0), len 40, FIB policy routed

*Feb 25 09:04:15.326: IP: s=192.168.0.201 (FastEthernet0/0), d=192.168.10.149, len 52, FIB policy match

*Feb 25 09:04:15.326: fibidb->namestring: Dialer0

*Feb 25 09:04:15.326: ipfib_policy_set_interface_lookup: tag_ptr: 0x0

*Feb 25 09:04:15.326: adj 0x0, NULL

*Feb 25 09:04:15.326: IP: s=192.168.0.201 (FastEthernet0/0), d=192.168.10.149 (Dialer0), len 52, FIB policy routed

*Feb 25 09:04:15.766: IP: s=192.168.0.201 (FastEthernet0/0), d=192.168.0.255, len 78, policy match

*Feb 25 09:04:15.766: IP: route map Input, item 10, permit

*Feb 25 09:04:15.766: IP: s=192.168.0.201 (FastEthernet0/0), d=192.168.0.255 (Dialer0), len 78, policy routed

*Feb 25 09:04:15.766: IP: FastEthernet0/0 to Dialer0 192.168.0.255

*Feb 25 09:04:15.814: IP: s=192.168.0.201 (FastEthernet0/0), d=192.168.10.149, len 52, FIB policy match

*Feb 25 09:04:15.814: fibidb->namestring: Dialer0

*Feb 25 09:04:15.814: ipfib_policy_set_interface_lookup: tag_ptr: 0x0

*Feb 25 09:04:15.814: adj 0x0, NULL

New Member

Re: Problem in Router 1841 - Route-map function

JS#sh route-map

route-map ISPB, permit, sequence 10

Match clauses:

interface Dialer1

Set clauses:

Policy routing matches: 0 packets, 0 bytes

route-map ISPA, permit, sequence 10

Match clauses:

interface Dialer0

Set clauses:

Policy routing matches: 0 packets, 0 bytes

route-map Input, permit, sequence 10

Match clauses:

ip address (access-lists): Permit_ISPA

Set clauses:

interface Dialer0 Dialer1

Policy routing matches: 16866 packets, 3434386 bytes

route-map Input, permit, sequence 20

Match clauses:

ip address (access-lists): Permit_ISPB

Set clauses:

interface Dialer1 Dialer0

Policy routing matches: 3 packets, 198 bytes

JS#

this is shop route-map

New Member

Re: Problem in Router 1841 - Route-map function

Please re-generate config to me.

New Member

Re: Problem in Router 1841 - Route-map function

i think you should be use ip cef function

179
Views
0
Helpful
6
Replies