Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Problem Loading Image on 1700 router

My router does no load the image . At the attachments you can see all the output.

What shall i do?

Thanks a lot

moses

3 REPLIES

Re: Problem Loading Image on 1700 router

HI Moses, [Pls Rate if HELPS]

This message only occurs when you load images that run from RAM. Cisco 1700 Series routers support images that run in RAM and images that run directly from Flash (for example, relocatable images), there are two solutions for this problem:

1. Upgrade the DRAM

2. Load a relocatable image; load an image from Flash

Refer LINK Below:

====================

http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a008009483a.shtml

Hope I am Informative.

PLS RATE if HELPS

Best Regards,

Guru Prasad R

Community Member

Re: Problem Loading Image on 1700 router

Hi and thanks. I wrote the command

rommon 8 > boot flash:c1700-advsecurityk9-mz.124-17.bin

but i have the same results.

The flash is this

rommon 7 > dir flash:

File size Checksum File name

13707088 bytes (0xd12750) 0xbd90 c1700-advsecurityk9-mz.124-17.bin

thanks

moses

Re: Problem Loading Image on 1700 router

HI Moses, [Pls Rate if HELPS]

I don't thinkso your Router is capable of booting on Image c1700-advsecurityk9-mz.124-17.bin

> It doesn't have enough RAM available to load on the new Software

Read the release notes below:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/1700rlsn/index.htm

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/1700rlsn/index.htm

PLS RATE if HELPS

Best Regards,

Guru Prasad R

121
Views
0
Helpful
3
Replies
CreatePlease to create content