Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem Matching QOS Citrix

Hello, i cant with my current configuration to match the citrix traffic incoming (interface gi 0/0), this router is 2821. IP cef is enable. When i do the command:

sh ip nbar protocol-discovery int gi0/0 (result in the attachement). Always Citrix zero. The version of PDLM is 10.

Thanks a lot for your help.

  • WAN Routing and Switching
5 REPLIES
Blue

Re: Problem Matching QOS Citrix

David,

Try adding this command:

ip nbar pdlm flash:citrix.pdlm

Please rate helpful posts.

Dave

New Member

Re: Problem Matching QOS Citrix

This order has been entered. The router says me that my pdlm is more recent.

Blue

Re: Problem Matching QOS Citrix

David,

So the PDLM is in the IOS. Your config looks correct. I have this running on 7206s, and it matches correctly on the ICA tags.

Is your Citrix implementation using port 1494 or 2598 session reliability? I do not think Citrix NBAR supports 2598, but I need to find out, because we are heading that way.

I would build an access list to check this out.

access-list 101 permit tcp any eq 1494 any

access-list 101 permit tcp any any eq 1494

access-list 101 permit tcp any eq 2598 any

access-list 101 permit tcp any any eq 2598

access-list 101 permit ip any any

Apply this inbound on your interface:

ip access-group 101 in

Then show access-list 101 and look for hits.

Dave

Re: Problem Matching QOS Citrix

try matching with ACL.

New Member

Re: Problem Matching QOS Citrix

I have tried to do that with acl, so I saw well that I used the port 1494 in TCP, Is there one or more commands in my configuration could prevent the match nbar.

Thanks a lot for your help

360
Views
0
Helpful
5
Replies
This widget could not be displayed.