Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Problem router 2621xm

Dea All,

Now i had the problem, could you help me?

1- i had router 2621xm:After i configure int f0/0 than no shut it show message like this:

Router(config)#int f0/0

Router(config-if)#ip add 10.10.10.1 255.255.255.0

Router(config-if)#no shut

*Mar 1 00:00:59.625: %AMDP2_FE-1-INITFAIL: CSR0=0x0000

Router(config)#

------------

by the way on router 2621xm had 2 fastethernet but my router i can see one interface is fastethernet 0/0.

What's going on?

Best Regards,

Join

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Problem router 2621xm

Join

It sounds like a hardware problem. Probably the best thing would be to open a case with Cisco TAC.

HTH

Rick

2 REPLIES
Hall of Fame Super Silver

Re: Problem router 2621xm

Join

It sounds like a hardware problem. Probably the best thing would be to open a case with Cisco TAC.

HTH

Rick

New Member

Re: Problem router 2621xm

Dear Rick,

Thank you for your reply.

Best Regards,

Join

123
Views
0
Helpful
2
Replies
CreatePlease to create content