cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
423
Views
0
Helpful
2
Replies

Problem with BGP session

Hello Colleagues,


I set up a scenario for the GNS studies, I have problem when trying to close a sessionwith another BGP peer that is not directly connected to the Router. The protocol used toreach and Peer OSPF, Ja realized ping test between these routers, I can access bothSSH and Telnet but not BGP session closes. Below is the topology. BGP is configuredbetween the R6 and R9 being that I can access via TELNET by R6 R9 and vice versa.Since already I thank you.

2 Replies 2

nkarpysh
Cisco Employee
Cisco Employee

Hi Tiago,

Did not get your problem fully. Can you please attach some logs showing what you dod and showing what problem do you have.

Have you you tried configuring:

neighbor X shutdown

Have you tried "clear ip bgp *"

Have you tried "clear tcp ..."?

Nik

HTH,
Niko

milan.kulik
Level 10
Level 10

Hi,

what is your problem exactly?

To close a BGP session? As Nikolay said, neighbor ... shutdown would fix it.

Or to open a BGP session? In you case, neighbor ... ebgp multihop might be necessary, see

http://www.cisco.com/en/US/docs/ios/12_3/iproute/command/reference/ip2_n1g.html#wp1037550

http://www.cisco.com/en/US/docs/ios/12_3/iproute/command/reference/ip2_n1g.html#wp1037550for details.

HTH,

Milan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco