Hello, first sorry for my English, is bad. I have a problem with a nat cisco 2611 router with adsl wic, the configuration I think this ok, but not working properly. I put the configuration and the result of the debug ip nat. Thank you.
service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! memory-size iomem 10 ip subnet-zero ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ! voice call carrier capacity active ! mta receive maximum-recipients 0 ! interface ATM0/0 mac-address 0024.d2c2.831f no ip address no ip route-cache no ip mroute-cache no atm auto-configuration no atm ilmi-keepalive no atm address-registration no atm ilmi-enable bundle-enable dsl operating-mode auto no fair-queue hold-queue 208 in ! interface ATM0/0.1 point-to-point ip address dhcp ip nat outside no ip route-cache no ip mroute-cache pvc 0/44 encapsulation aal5snap ! ! interface Ethernet0/0 ip address 192.168.0.222 255.255.255.0 ip nat inside half-duplex hold-queue 100 out ! interface Ethernet0/1 no ip address shutdown half-duplex ! ip nat inside source list 1 interface ATM0/0.1 overload ip nat inside source static tcp 192.168.0.2 25 int atm0/0.1 25
ip classless ip route 0.0.0.0 0.0.0.0 ATM0/0.1 ip http server ! access-list 1 permit 192.168.0.0 0.0.0.255 ! call rsvp-sync ! mgcp profile default ! dial-peer cor custom ! line con 0 line aux 0 line vty 0 4 login ! end
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...