Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

problem with pppoe sessions

why when the connections overcomes 420 - 430 sessions they begin to be rejected??

CONF:

aaa new-model

aaa authentication ppp default local group radius

aaa authorization network default local group radius

aaa accounting network default

action-type start-stop

group radius

aaa session-id common

clock timezone Argenti 4

clock calendar-valid

pppoe-forwarding

ip source-route

ip cef

ip name-server x.x.x.x

ip address-pool local

no ipv6 cef

multilink bundle-name authenticated

memory-size iomem 0

username Administrator privilege 15 secret 5 $1$4PF8$VUGfHaUj1Wu4UX7OCcrMU.

archive

log config

hidekeys

bba-group pppoe global

virtual-template 1

sessions max limit 8000

sessions per-vc limit 8

sessions per-mac limit 2

interface FastEthernet0/0

ip address 192.168.2.252 255.255.255.0

duplex full

speed auto

interface GigabitEthernet0/0

ip address a.a.a.a 255.255.255.248

duplex auto

speed auto

media-type rj45

negotiation auto

interface GigabitEthernet0/1

no ip address

no ip mroute-cache

duplex auto

speed auto

media-type rj45

negotiation auto

vlan-range dot1q 1 1000

pppoe enable group global

exit-vlan-config

!

interface Virtual-Template1

description ClientesPPPoE

mtu 1492

ip unnumbered GigabitEthernet0/0

peer default ip address pool ip-pool

ppp authentication pap

!

ip local pool ip-pool b.b.b.b c.c.c.c

ip forward-protocol nd

ip route 0.0.0.0 0.0.0.0 d.d.d.d

no ip http server

no ip http secure-server

dialer-list 1 protocol ip permit

radius-server host e.e.e.e auth-port 1645 acct-port 1646

radius-server key serverkey

control-plane

no call rsvp-sync

mgcp fax t38 ecm

dial-peer cor custom

THANKS

2 REPLIES
Hall of Fame Super Silver

Re: problem with pppoe sessions

Hello Jorge,

each session uses resources.

More specifically one entry in the IDB (interface database descriptor ) is used.

Different platforms have different limits for the size of the IDB table.

A Cisco 10000 can handle 20,000 and more sessions but an ISR like 2800 or 3800 cannot.

see

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a0080094322.shtml

Edit:

I see from your other thread that you are using a C7201.

Hope to help

Giuseppe

New Member

Re: problem with pppoe sessions

Edit

both issues are from the C7201. This router have a limit of 8k sessions (the license i acquire say that) but i dont understand why have this problem, sure i'm doing something wrong

195
Views
0
Helpful
2
Replies