Hi ,
I am using a cisco 2801 router and it has got a VWIC-1MFT-E1 card in its slot3. I want to configure this E1 card for unframed option.
My ios is c2801-ipbase-mz.124-1c.bin. I am not able to configure the unframed option in this.
Please let me know the command for this or if it does not work clarify whether this is a limitation in the ios version.
WIC/VIC/HWIC Slot 3:
E1 (1 port) Multi-Flex Trunk WAN daughter card
Hardware revision 1.0 Board revision B0
Serial number 35329323 Part number 800-04475-04
FRU Part Number VWIC-1MFT-E1=
Test history 0x0 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 21 01 00 02 1B 15 2B 50 11 7B 04 00 00 00 00
0x30: 58 00 00 00 06 10 27 00 FF FF FF FF FF FF FF FF
Regards
Balaji.
