Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Problem with unframed e1 config

Hi ,

I am using a cisco 2801 router and it has got a VWIC-1MFT-E1 card in its slot3. I want to configure this E1 card for unframed option.

My ios is c2801-ipbase-mz.124-1c.bin. I am not able to configure the unframed option in this.

Please let me know the command for this or if it does not work clarify whether this is a limitation in the ios version.

WIC/VIC/HWIC Slot 3:

E1 (1 port) Multi-Flex Trunk WAN daughter card

Hardware revision 1.0 Board revision B0

Serial number 35329323 Part number 800-04475-04

FRU Part Number VWIC-1MFT-E1=

Test history 0x0 RMA number 00-00-00

Connector type PCI

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 21 01 00 02 1B 15 2B 50 11 7B 04 00 00 00 00

0x30: 58 00 00 00 06 10 27 00 FF FF FF FF FF FF FF FF

Regards

Balaji.

1 REPLY
New Member
290
Views
0
Helpful
1
Replies
CreatePlease to create content