Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

problems regarding pppoe on 2600

i am trying to configure ppoe on my 2600 router and i am expiriencing some problems.

first of all i'll post the version of my router so if theres a problem on my IOS let me know and i'll upgare it.

---------------------------------------

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Tue 07-Dec-99 02:12 by phanguye

Image text-base: 0x80008088, data-base: 0x807AAF70

---------------------------------------

i am watching the configuration from a webpage i have found:

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080126dc0.shtml

now i am unable to activate some things i am seeing there like.

vpdn-group

i would assume its cisco(config)#>vpdn-group

but even with i prompt the "?" on the vpdn i get nothing.

secound is enabling the pppoe on the eth int. same as with the vpdn, seems like i dont have the command to do it.

what am i doing wrong... can anyone guid me threw it in more details... do i need to upgrade my IOS?

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: problems regarding pppoe on 2600

Hello,

your IOS version is IP Only, and indeed not sufficient for PPPoE. You need e.g. 12.2(15)T17

(image name c2600-is-mz.12.2-15.T17), but that version requires 64MB DRAM and 32MB Flash. A ´show version´ will tell you how much DRAM and Flash you have...

Regards,

Nethelper

1 REPLY
Bronze

Re: problems regarding pppoe on 2600

Hello,

your IOS version is IP Only, and indeed not sufficient for PPPoE. You need e.g. 12.2(15)T17

(image name c2600-is-mz.12.2-15.T17), but that version requires 64MB DRAM and 32MB Flash. A ´show version´ will tell you how much DRAM and Flash you have...

Regards,

Nethelper

110
Views
0
Helpful
1
Replies
This widget could not be displayed.