Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with ASA 5510

My ASA 5510 have 5 light (Power, Status, active, VPN and flash) whan I turn on the ASA, the Power light is off, the active and status are in red adn VPN in green. Could you tell me, What can I do?

2 REPLIES

Re: Problems with ASA 5510

If there is nothing on the console ,it's best to open a TAC case.

Re: Problems with ASA 5510

Collin's right. According to this document:

http://www.cisco.com/en/US/docs/security/asa/asa72/getting_started/asa5505/quick/guide/install.html#wp1041148

The status light having an amber condition indicates that there's a problem, but it also says that an off power light means no power.

Verify that you have a good cable and a good power source by trying to take it somewhere else in your building, and other than that submit a tac case.

HTH,

John

HTH, John *** Please rate all useful posts ***
1499
Views
0
Helpful
2
Replies