03-12-2008 05:06 PM - edited 03-03-2019 09:06 PM
This is my first experience configuring a production router and firewall. Could some check the configs to see if they would work. Thanks.
03-15-2008 07:16 AM
Hi,
There are missing informations. i.e.
- What are you trying to achieve with your configuration?
- Show us the network topology.
Regards,
Dandy
03-15-2008 09:10 AM
Originaly there was/is a P2P connecting branch office with hq with ability to dial phone extensions on both sides. The following is the topology. The configs worked, except the digital phone system could not dial extensions through the point tp point. Both sides of the P2P have same type of digital phone.
Internet
^ T1
Cisco 1720 DIA router
^
ASA5505 Firewall
^
LAN switch > T1 Point to point Cisco 1721
router (connecting this branch
office with servers at HQ, plus
the digital phone system)
^
Hosts, Servers Printers, Inter-Tel digital phone system
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: