Our company owns an RV042 Linksys. We use Load Balancing and we have binded Protocol 433 https to WAN2. You can find a screenshot of the configuration in attachment. We also have the latest firmware 1.3.12 19-tm.
This is what happens :
People outside the company use Outlook Anywhere (RPC over HTTPS). After establising the initial connection between Outlook and our internal Exchange server all communications go through WAN2. But at random intervals (after 15 minutes for instance) the client receives https communication comming from WAN1. Needless to say Outlook Anywhere loses its connection.
I'm thinking this is a bug by design.
Can someone please confirm this ?
I've seen another post by a user named Marc Webb that has the exact same issue, with no reply whatsoever.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...