I have a psudowire connection between two data centers. When I connect my switch port on one end to a port on data center switch, should the link light come up even if other end is not connected? Assuming ports on one end of link are turned up.
If you connect your switch to the data center switch, as long as the data center switch and your switch are turned on and you are connecting using the correct media, optics and cable type, you should see a link light.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...