i have cisco router 1921. i config nat " ip nat inside source static tcp 192.168.2.4 80 a.b.c.d 80 extenable " my site excess outside with url . but when i access the this site inside with url it con't be access. what is the solution expect entry in host file or DNS. i want to solve this problem through some entry in Router
The best solution would be to create host entry in DNS "example.domain.com" 1. internal DNS: record with 192.168.20.40 IP address 2. public DNS: record with public IP address x.y.w.z
You'll be able to reach web server on the very same way (same url address http://example.domain.com) regardless of client location (inside or outside of the company). Even better: traffic won't consume router resources when client would be in a same network segment with a server.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...