i have cisco router 881 (4 lan port and 1 WAN) and i have real ip from ISP assigned to WAN port (\30 subnet) , also i have real ip range from ISP (\29).. the question is: Can i specify one real ip from range to spesific device connected to one of lan port ?? if yes , What will be the gateway for the device connected to this port??
in the other word; can i assigen private ip to lan/vlan port and public ip (from ISP range) to the same LAN port.?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...