Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PXE Boot

Is there a specific configuration I have to add to my 4507's or 6513's in order to have them forward PXE boot requests from a client. Our PXE Server (a server running Altiris Deployment Solution) is located at our NOC and our clients are located throughout our WAN. We are interconnected via gigabit fiber. My clients already boot to a centralized DHCP server which is located in the same location and subnet as our PXE server.

2 REPLIES
Silver

Re: PXE Boot

This situation seems to only occur when the offer does not contain an IP address for the client, which forces the router to broadcast the response. This problem does not affect normal DHCP traffic, since a real DHCP frame from a

DHCP server offers an IP address. It will affect portable execution environment (PXE) clients that are using LCCM servers to gather their configurations files.

http://www.cisco.com/en/US/docs/server_nw_virtual/commercial_host_driver/boib_linux/user/guide/boot.html#wp945764

New Member

Re: PXE Boot

Hi,

Just add "ip helper-address " into your router LAN interface (where you should already have current ip helper-address for DHCP.

Hope it help.

Rgds,

Christopher

634
Views
0
Helpful
2
Replies