Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

QnQ support on 10 gigabit ethernet interface

Hi,

Can someone let me know if a 6500 router supports QnQ on 10 gigabit ethernet interface? I'm using the s72033-adventerprisek9_wan-mz.122-33.SRA.bin IOS.

Regards,

Don

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: QnQ support on 10 gigabit ethernet interface

relevant documentation is available at

http://www.cisco.com/en/US/products/ps9335/index.html

Might be a good idea to get further confirmations from a TAC engineer

Hall of Fame Super Silver

Re: QnQ support on 10 gigabit ethernet interface

The product bulletin on 12.1(11b)EX1 for Supervisor Engines (see http://www.cisco.com/en/US/products/hw/routers/ps368/prod_bulletin09186a0080092390.html) reports adding support for 802.1q in 802.1q (802.1q Tag Stacking).

The release notes for 12.2 (http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/ol_14271.html) report that the WS-X6548-GE-TX, WS-X6548V-GE-TX WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF cards do not support 802.1Q tunneling. There is no such caveat for the various 10 GE cards (WS-X6502, -6704, -6708 and -6716) so you should be fine.

Configuration of the feature is covered in http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/l2pt.html

Hope this helps. Please rate the post if it does.

2 REPLIES
New Member

Re: QnQ support on 10 gigabit ethernet interface

relevant documentation is available at

http://www.cisco.com/en/US/products/ps9335/index.html

Might be a good idea to get further confirmations from a TAC engineer

Hall of Fame Super Silver

Re: QnQ support on 10 gigabit ethernet interface

The product bulletin on 12.1(11b)EX1 for Supervisor Engines (see http://www.cisco.com/en/US/products/hw/routers/ps368/prod_bulletin09186a0080092390.html) reports adding support for 802.1q in 802.1q (802.1q Tag Stacking).

The release notes for 12.2 (http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/ol_14271.html) report that the WS-X6548-GE-TX, WS-X6548V-GE-TX WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF cards do not support 802.1Q tunneling. There is no such caveat for the various 10 GE cards (WS-X6502, -6704, -6708 and -6716) so you should be fine.

Configuration of the feature is covered in http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/l2pt.html

Hope this helps. Please rate the post if it does.

370
Views
0
Helpful
2
Replies
CreatePlease to create content