Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QOS ,CCTV

Hello,

my Question is  if i have 1 MB link and want to allocate 512 Kbps for the CCTVSystem and 512 Kbps for the Data on cisco router how will be the configuration for that ?

Everyone's tags (2)
4 REPLIES
Super Bronze

Re: QOS ,CCTV

What kind of link?  1 Mbps physical or logical?  What IOS version on the router?  Do CCTV hosts mark their traffic?

New Member

QOS ,CCTV

MPLS link.IOS version is 12.4

Super Bronze

QOS ,CCTV

Your router's interface is configured for MPLS natively?  Link is physically Ethernet?  So the 1 Mbps is a logical limit?

What release of 12.4?  (QoS features were greatly enhance in the later 12.4 releases.)  Answer to my CCTV is marking question?

QOS ,CCTV

Yes you can reserve bandwidth for video and data traffic on a cisco router using class-based-queuing. However, first you need to define/segregate your video traffic from the data.

You can use Cisco NBAR feature to do that or if your CCTV is marking the TOS byte of IP header then you can classify based on that as well.

!

http://www.cisco.com/en/US/docs/ios-xml/ios/qos_conmgt/configuration/12-4/qos-conmgt-cfg-wfq.html#GUID-9003885B-51B6-436B-9825-4804E51DCE53

http://www.cisco.com/en/US/partner/docs/ios-xml/ios/qos_nbar/configuration/12-4/qos-nbar-12-4-book.html

!

Note : -  Cisco ISR routers do not support queuing on Etherswitch-Modules

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/prod_white_paper0900aecd8064c9f4_ps380_Products_White_Paper.html

722
Views
0
Helpful
4
Replies