You haven't mentioned the hardware in question but if we are dealing with a regular IOS router, the config is as follow.
First, you need to create an ACL to identify those 2 hosts.
access-list 1 permit host A.B.C.D
access-list 1 permit host E.F.G.H
Then you create the class-map to match against these host
match access-group 1
Then you need you associate the class-map to a policy-map and if you are dealing with voice traffic, we recommend apply priority instead of bandwidth reservation. Priority will allow the packets to be dequeue first. You also have to create a hierarchical policy because you are running subrated speeds.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.