Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QOS for VC - Are these stats any good ?

Hi all

Im troubleshooting my video conference dropouts between 2 sites on an mpls

the call connected at 384k for 15 minutes

I downloaded a large file whilst making the vc call and could see the bandwidth at a constant 3.2 meg from a 4 meg max line,

we shape the outbound traffic to 4 meg max, the vc is put into the priority queue at 1 meg

from the tandberg i observed the following

during the download =

Transmit total packet loss 0.2%

Transmit jitter 5ms

Receive packet loss 3.4%

Transmit jitter 4ms

I then stopped the download and recorded the same

Transmit total packet loss 0.2%

Transmit jitter 4ms

Receive packet loss 3.7%

Transmit jitter 2ms

Is there anything wrong with this, and are these acceptable stats for a VC call across an MPLS? would these stats cause the call to disconnect?

cheers

Carl

Everyone's tags (6)
226
Views
0
Helpful
0
Replies
CreatePlease to create content