As I am very week in QOS I need help here. I want to prioritize/dedicate bandwidth for voice traffic to head office from all the branch offices. Few branch offices are connected with L3 MPLS and few are with leased line.
Only prioritizing/or dedicate few bandwidth voice on the network will do and all other traffic can treat as default and can use the remaining bandwidth.
Branch offices I have cisco 2821 please advice what is the easiest way to achive this I have prepared a configuration with help of google J( below given) but I don’t how much this will help…
Thank u all
class-map match-any voice-traffic match dscp ef class-map match-any voice-signal match dscp af31 ! policy-map voice-policy class voice-traffic priority 200 class voice-signal bandwidth 8 class class-default fair-queue ! policy-map shaper class class-default shape average 350000 3500 0 service-policy voice-policy ! interface FastEthernet4 service-policy output shaper !
Here I am applying this configuration on my outgoing traffic (outbound ) on the branch router, would this be sufficient to allocate bandwidth for voice ? is there anything I have to do in HO router I mean same configuration on traffic of HO router(SP will trust our packet)
Since WAN link is L3 MPLS and cable is connected to 1gig port on the router and link band width is 6Mb. So accordingly I have to shape the interface bandwidth.
PLease correct me here if I am wrong I think same configuration I can use for leased circute line as well right ?
One more thing I tested this conf in GNS 3640 and its gave me an error at this stage
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...