I needed some clarification on how QoS is implemented on a Network. As far as Iam aware, We mark and classify the packets and then make a policy map and apply it on the Interface.
Now, are we using ACLs to classify traffic on the LAN switches and then marking them? What configuration are we doing on the switches and Routers? Is there any special configuration being done for voice traffic?
What does it mean when we saying that the LAN is trusting DSCP?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...