I need QOS for Voice and data traffic required saprate , one of our customer having bandwidth 2.4 MB bandwidth we are given to them, now they are required for Voice 1.5 MB and other 900kb for data. we configured rate-limit on their sub interface in our 3845 router. pl see config
interface GigabitEthernet0/1.9 description *** Dave Info *** encapsulation dot1Q 9 ip address 184.108.40.206 255.255.255.252 rate-limit input 2400000 64000 64000 conform-action transmit exceed-action drop
rate-limit output 2400000 64000 64000 conform-action transmit exceed-action drop
Please help me how can i do sapreate traffic for voice and data , as per their requird for voice and data.
P.S : Be aware that you may not be able to apply LLQ or CBWFQ outbound on subinterfaces. You need to use Hierarchical QoS with parent policy-map to shape the traffic at certian rate and apply child policy with LLQ.
I havnt very much knowledge about Qos , i am not aware very well about that , i have seen , there are lots of in details so i am confuse.
I request you please if possible for me to make any templates as per my required Voice and data traffic need to saprate when 2.4 mb configured in subinterface , they are required 1.5 mb for voice and other are data which is 900kb. by Qos.
interface GigabitEthernet0/1.9 description *** Dave Info *** encapsulation dot1Q 9 ip address 220.127.116.11 255.255.255.252 rate-limit input 2400000 64000 64000 conform-action transmit exceed-action drop rate-limit output 2400000 64000 64000 conform-action transmit exceed-action drop
if you make templates in global mode as per my required, i realy vert appreciate.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.