Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

qos issue

Dear guys

i have a wireless link between my routers

here is the topology :

SERVER -- Router --- Wireless <---->Wireless ---- router --- clients

by the way my wireless link is 36 Mbps but sometimes suddenly it decrease to 6 Mbps

on my client side i have two type of cumstomer .. gold one and bulk one

i need a dynamic qos that if the link congest suddenly my gold customer have a very better bandwidth access than my ordinary customer

regards

1 REPLY
Silver

Re: qos issue

CBWFQ will accomplish exactly what you need. Configure it on both routers and apply the service-policy in output direction on the wireless interface.

Here is a detailed guide:

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800b75af.html#1041636

But there is a problem. Because you have a variable speed, you need to apply the map where the buffers of output interface fill up. In this case it's the wireless radio interface. Is your wireless a module in your router?

92
Views
0
Helpful
1
Replies
CreatePlease to create content