Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

QoS - Marking Question

Hi,

If I have this config on a router;

class-map match-all Multimedia_out

match ip dscp ef

policy-map classify_out

class Multimedia_out

priority percent 20

And this config on the switch that connects to the router; (Which is just an AutoQoS config)

mls qos srr-queue input cos-map queue 1 threshold 2 1

mls qos srr-queue input cos-map queue 1 threshold 3 0

mls qos srr-queue input cos-map queue 2 threshold 1 2

mls qos srr-queue input cos-map queue 2 threshold 2 4 6 7

mls qos srr-queue input cos-map queue 2 threshold 3 3 5

mls qos srr-queue input dscp-map queue 1 threshold 2 9 10 11 12 13 14 15

mls qos srr-queue input dscp-map queue 1 threshold 3 0 1 2 3 4 5 6 7

mls qos srr-queue input dscp-map queue 1 threshold 3 32

mls qos srr-queue input dscp-map queue 2 threshold 1 16 17 18 19 20 21 22 23

mls qos srr-queue input dscp-map queue 2 threshold 2 33 34 35 36 37 38 39 48

mls qos srr-queue input dscp-map queue 2 threshold 2 49 50 51 52 53 54 55 56

mls qos srr-queue input dscp-map queue 2 threshold 2 57 58 59 60 61 62 63

mls qos srr-queue input dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31

mls qos srr-queue input dscp-map queue 2 threshold 3 40 41 42 43 44 45 46 47

mls qos srr-queue output cos-map queue 1 threshold 3 5

mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7

mls qos srr-queue output cos-map queue 3 threshold 3 2 4

mls qos srr-queue output cos-map queue 4 threshold 2 1

mls qos srr-queue output cos-map queue 4 threshold 3 0

mls qos srr-queue output dscp-map queue 1 threshold 3 40 41 42 43 44 45 46 47

mls qos srr-queue output dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31

mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 54 55

mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 62 63

mls qos srr-queue output dscp-map queue 3 threshold 3 16 17 18 19 20 21 22 23

mls qos srr-queue output dscp-map queue 3 threshold 3 32 33 34 35 36 37 38 39

mls qos srr-queue output dscp-map queue 4 threshold 1 8

mls qos srr-queue output dscp-map queue 4 threshold 2 9 10 11 12 13 14 15

mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7

Will the traffic marked with DSCP 46 be correctly sent in the LLQ defined on the router, since DSCP46 is the same as DSCP ef?

So i guess my question is, does it matter that on the router it says dscp ef and on the switch its dscp 46?

Thanks

1 REPLY
Cisco Employee

Re: QoS - Marking Question

Hi,

Your traffic will be classified properly.

Even if you try configuring "match dscp 46" on a router, it will end up showing in running config as "match dscp ef".

HTH,

Nagendra

125
Views
4
Helpful
1
Replies
CreatePlease to create content