Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Qos On 3750

Dear Member,

We want to configure bandwidth mangement on 3750 . there are number of vlans on 3750.

Can it possible by QOS ?

pls suggest

Thanks

4 REPLIES
Hall of Fame Super Blue

Re: Qos On 3750

mayank.parekh wrote:

Dear Member,

We want to configure bandwidth mangement on 3750 . there are number of vlans on 3750.

Can it possible by QOS ?

pls suggest

Thanks

Yes it's possible, the 3750 supports many of the QOS features. See the configuration doc for full details and configuration examples -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_50_se/configuration/guide/swqos.html

Jon

New Member

Re: Qos On 3750

Thanks Jon,

If you have any example config then please share .

Hall of Fame Super Blue

Re: Qos On 3750

mayank.parekh wrote:

Thanks Jon,

If you have any example config then please share .

Well it depends on what you actually want to do ?

If you search the NetPro forums with the specifics of what you want to do then there will be multiple answers that will provide config examples.

Jon

New Member

Re: Qos On 3750

Thanks

Please check we have just configure qos on 3750 for testing purpose

Is this write or we want to add som more ?

Switch(config)# ip access-list extended qostest
Switch(config-ext-nacl)#permit ip 172.16.25.252 0.0.0.3 any

Switch(config)# class-map qos-test
Switch(config-cmap)# match access-group name qostest
Switch(config-cmap)# exit

Switch(config)# policy-map test1
Switch(config-pmap)# class qos-test
Switch(config-pmap-c)# trust dscp
Switch(config-pmap-c)# police 10000 8000 exceed-action policed-dscp-transmit
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit

Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# service-policy input test1

749
Views
0
Helpful
4
Replies