cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
442
Views
0
Helpful
2
Replies

QoS on a 3825

niro
Level 1
Level 1

I have a 3825 with a 4 port etherswitch, and I was hoping to use one of those ports as the MPLS link in our HQ.  However the etherswitch does not support outbound policies (Only inbound).  Is there another module for the 3825 which does support outbound qos policies other then the T1 cards?

1 Accepted Solution

Accepted Solutions

Nagendra Kumar Nainar
Cisco Employee
Cisco Employee

Hi,

HWIC-1FE and HWIC-2FE inherits all features supported by onboard ethernet interface.These are routed ports whereas HWIC-ESW cards are layer2 ports.

http://cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5855_Products_Data_Sheet.html

HTH,

Nagendra

View solution in original post

2 Replies 2

Nagendra Kumar Nainar
Cisco Employee
Cisco Employee

Hi,

HWIC-1FE and HWIC-2FE inherits all features supported by onboard ethernet interface.These are routed ports whereas HWIC-ESW cards are layer2 ports.

http://cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5855_Products_Data_Sheet.html

HTH,

Nagendra

Thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: