Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS on a 3825

I have a 3825 with a 4 port etherswitch, and I was hoping to use one of those ports as the MPLS link in our HQ.  However the etherswitch does not support outbound policies (Only inbound).  Is there another module for the 3825 which does support outbound qos policies other then the T1 cards?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: QoS on a 3825

Hi,

HWIC-1FE and HWIC-2FE inherits all features supported by onboard ethernet interface.These are routed ports whereas HWIC-ESW cards are layer2 ports.

http://cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5855_Products_Data_Sheet.html

HTH,

Nagendra

2 REPLIES
Cisco Employee

Re: QoS on a 3825

Hi,

HWIC-1FE and HWIC-2FE inherits all features supported by onboard ethernet interface.These are routed ports whereas HWIC-ESW cards are layer2 ports.

http://cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5855_Products_Data_Sheet.html

HTH,

Nagendra

New Member

Re: QoS on a 3825

Thanks!

240
Views
0
Helpful
2
Replies