Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

QoS on BRI interface

Hi,

I have got a Cisco 1841 on a remote site with an ISDN BRI with multilink activated.

I have defined the interface as 128 k of bandwidth and want to apply the following  QoS policy.

int bri0/0/0

bandwidth 128

class-map match-any CriticalApps
match access-group 120
class-map match-any CCP-Voice-2
match  dscp ef

class-map match-any CCP-Signaling-2
match  dscp cs3
match  dscp af31

policy-map CCP-QoS-Policy-2
class CCP-Voice-2
  priority percent 10
class CCP-Signaling-2
  priority percent 10
  class CriticalApps
  bandwidth percent 40
class class-default
bandwidth percent 25 
random-detect

int bri0/0/0

bandwidth 128

service-policy output CCP-QoS-Policy-2

I wanted to know if the policy will be working on the 64k or 128 k basis.

The ACL only filters trafic to application servers.

Can i go ahead with this configuration.

Thanks,

Ashley

174
Views
0
Helpful
0
Replies
CreatePlease to create content