Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

QOS on MFR0

If I have an MFR0 bundle and I have a policy map on the major interface and a policy map on the subinterfaces does the policy on the subinterface override or is it a combination deal?

3 REPLIES

Re: QOS on MFR0

Hi,

The Policy-map on the Major Interface will override the Policy-map on the subinterface.

HTH

Mohamed

New Member

Re: QOS on MFR0

but what if they do different things. In other words say the major policy gives a percentage of traffic to voice on a global level yet on the subint there is a policy that shapes traffic and further sets dscp values? I guess what I am asking if they the two policies don't overlap do they both get invoked

Re: QOS on MFR0

Hi,

As noted, the major interface has always prefrence, so the policy applied to the main interface will override the applied on the subinterface.

For your requirment, I think you will need to have 2 policies applied to 2 different subinterfaces if possible, but this will require changes on your current setup.

HTH

Mohamed

132
Views
0
Helpful
3
Replies
CreatePlease to create content