My question is what QoS mechanisms are supported on this module? Basically it is a switch module and should support all L2 QoS features such as SRR or WRR queuing. But it could also add "routed" ports to the router chassis (with "no switchport" command). And it do accept policy-map with hierarchical QoS configuration in such mode. For example -
ip address 10.1.1.1 255.255.255.248
service-policy output 10Meg
policy-map 10Meg class VOIP priority 2048 class ROUTING bandwidth 512 class SCAVENGER police cir 1000000 class WWW
bandwidth 2048 class class-default shape average 5000000
So we can see it accept LLQ, CBWFQ, shaping and police related commands. But it seems to me that absolutely nothing works except POLICE-related statements. So I wonder whether it is possible to make LLQ, CBWFQ and GTS working on this module? I use Cisco 3825 router with IOS version 12.4(24)T.
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...