Hi, thanks in advance for any help you could give me.
I'm trying to configure QoS between my US site and my UK site. Here are the details:
1. Leased line has a bandwidth of 3Mbps.
2. I have 5 queues: Voice (ef), Control protocols (af41), Video (af31), Citrix (af21), and default
Here's the relevant config. Tagging is done on the inbound interface and I'm only showing the outbound interface here.
The problem I am experiencing is that class-default traffic sometimes uses up all the bandwidth to the point that it affects the quality of the other traffic. Keep in mind that this link is the bottleneck. Everything else is gigabit.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...