Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

%QOS Policy-maps configuration is not supported

I get this error from a 7201 durring the POST of the router boot. QOS is applied to the WAN interface and I see no other errors in the router.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: %QOS Policy-maps configuration is not supported

Hi,

Are you seeing this message listed above the Boot Messages.

% QOS Policy-maps configuration is not

%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.

If the Messages appear before

"SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader."

They are generated by the boot image when it is parsing the config. This is typically due a features not supported by the boot image.

This should not impact the router after loading the "final" IOS.

Regards,

Arul

*Pls rate all helpful posts*

3 REPLIES

Re: %QOS Policy-maps configuration is not supported

has this been working before ? Was there any change or it pop'ed up suddenly ?

Raj

New Member

Re: %QOS Policy-maps configuration is not supported

This is a New router first time a config has been put in. we have tried different IOS Codes as well. always getting this error though.

Cisco Employee

Re: %QOS Policy-maps configuration is not supported

Hi,

Are you seeing this message listed above the Boot Messages.

% QOS Policy-maps configuration is not

%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.

If the Messages appear before

"SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader."

They are generated by the boot image when it is parsing the config. This is typically due a features not supported by the boot image.

This should not impact the router after loading the "final" IOS.

Regards,

Arul

*Pls rate all helpful posts*

650
Views
3
Helpful
3
Replies
CreatePlease login to create content