Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

QOS precedence for an application

Dear Experts,

how to see number of queues on particular port in 3845 router.

2 i want to apply qos mechanism on router for particular application suppose having ip 172.26.5.230 with the help of  dscp ip priorty . this application access by 172.26.39.0/24 user at remote site . can any body tell me how to apply qos on class based that particular queue should carry dscp value defined traffic having  defined percentage to queue.

3. how many packets per queue are supported and rate of forwarding of packets per second by ingress to egress in 3845 model by queue

Regards,

Rajat

1 REPLY
Super Bronze

QOS precedence for an application

Disclaimer

The     Author of this posting offers the information contained within this     posting without consideration and with the reader's understanding  that    there's no implied or expressed suitability or fitness for any   purpose.   Information provided is for informational purposes only and   should not   be construed as rendering professional advice of any kind.   Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In     no event shall Author be liable for any damages whatsoever   (including,   without limitation, damages for loss of use, data or   profit) arising  out  of the use or inability to use the posting's   information even if  Author  has been advised of the possibility of  such  damage.

Posting

A 3845 IOS QoS features are quite extensive; they also vary per IOS version.  Your questions are very broad.  Answering them would take a combination of "it depends" and it could be done this way, or this way, or this way, etc.  Suggest you examine the configuration guide's QoS chapter for your IOS and also search Cisco's main site for QoS examples.

153
Views
0
Helpful
1
Replies
CreatePlease to create content