Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

QOS Prioritizing Traffic Problem

Remote office/Cisco 1841

I am puzzled.

The "show policy-map interface" shows the correct class-map (priority),

shows that there are plenty of packets that have been processed through the

priority class-map. Everything looks OK except for the "Packets marked 0"

piece. I don't understand why that doesn't show a non-zero number.

List below is my config.

!

version 12.3

no service pad

service tcp-keepalives-in

service tcp-keepalives-out

service timestamps debug datetime msec localtime show-timezone

service timestamps log datetime msec localtime show-timezone

service password-encryption

service sequence-numbers

!

boot-start-marker

boot-end-marker

!

security authentication failure rate 3 log

security passwords min-length 6

logging buffered 51200 warnings

!

memory-size iomem 25

clock timezone NewYork -5

clock summer-time NewYork date Apr 6 2003 2:00 Oct 26 2003 2:00

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

no aaa new-model

ip subnet-zero

no ip source-route

ip cef

!

!

ip tcp synwait-time 10

!

class-map match-all priority

match access-group name priority

!

!

policy-map outbound

class priority

set ip precedence 1

bandwidth 768

class class-default

set ip precedence 0

fair-queue

!

!

!

interface Null0

no ip unreachables

!

interface Serial0/0/0

description $FW_INSIDE$

ip address x.x.x.x

ip access-group 103 out

ip verify unicast reverse-path

no ip redirects

no ip unreachables

no ip proxy-arp

ip nbar protocol-discovery

max-reserved-bandwidth 100

service-policy output outbound

encapsulation ppp

ip route-cache flow

service-module t1 timeslots 1-24

!

ip http server

ip http access-class 1

ip http authentication local

!

ip access-list extended priority

permit tcp any any eq telnet

permit ip any 192.168.0.0 0.0.255.255

!

sh access-list

Extended IP access list priority

10 permit tcp any any eq telnet (44906 matches)

20 permit ip any 192.168.0.0 0.0.255.255 (19774 matches)

show policy-map interface

Serial0/0/0

Service-policy output: outbound

Class-map: priority (match-all)

64711 packets, 13911001 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: access-group name priority

QoS Set

precedence 1

Packets marked 0

Queueing

Output Queue: Conversation 266

Bandwidth 768 (kbps) Max Threshold 64 (packets)

(pkts matched/bytes matched) 0/0

(depth/total drops/no-buffer drops) 0/0/0

Class-map: class-default (match-any)

2909411 packets, 492075275 bytes

5 minute offered rate 1000 bps, drop rate 0 bps

Match: any

QoS Set

precedence 0

Packets marked 88296

Queueing

Flow Based Fair Queueing

Maximum Number of Hashed Queues 256

(total queued/total drops/no-buffer drops) 0/0/0

2 REPLIES
Community Member

Re: QOS Prioritizing Traffic Problem

Hello,

It's better to modify the configuration as below

class-map match-all priority-in

match access-group name priority

class-map match-all priority-out

mach ip precedence 1

class-map

set ip precedence 0

Policy-map inbound

class priority-in

set ip precedence 1

policy-map outbound

class priority-out

bandwidth 768

class class-default

fair-queue

interface

service-policy input inbound

interface

service-policy outbound

Thanks,

Ahmed Hussein

Re: QOS Prioritizing Traffic Problem

Dear smartin,

Its seems that there are no packet matched by the class-map priority due to ACL behavior which is (If match Then Stop) so i beleive that the below configurations example will achive your needs ISA.

Ex1:

----

class-map match-all priority

match access-group 101

policy-map Outbound

class priority

bandwidth 768

set ip precedence 1

class class-default

set ip precedence 0

fair-queue

access-list 101 permit tcp any 192.168.0.0 0.0.255.255 eq telnet

Ex2

---

class-map match-all priority

match protocol telnet

class-map match-all address

match access-group 100

class-map match-all parent

match class-map address

match class-map priority

policy-map outbound

class parent

bandwidth 768

set ip precedence 1

class class-default

set ip precedence 0

fair-queue

access-list 100 permit ip any 192.168.0.0 0.0.255.255

Please Let me know the results

Best Regards,

Mounir Mohamed

Core Engineer

NOOR Advanced Technology, SAE

229
Views
0
Helpful
2
Replies
CreatePlease to create content