Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QOS shaping based on Object group

                   Hi, Thanks in advance

I am trying to configure QOS shaping based on object-group, however cant get it to work. Can anyone point me to right direction

Here is the snipet of config

object-group network admin
host 10.1.1.1

class-map match-any adminout
match access-group name adminlistout

policy-map QOS-OUT
class adminout
    shape average 10000000

policy-map SHAPE-OUT
class class-default
    shape average 100000000 1000000
  service-policy QOS-OUT

interface GigabitEthernet0/0
bandwidth 100000
service-policy output SHAPE-OUT


ip access-list extended adminlistout
permit ip object-group admin any

Everyone's tags (5)
421
Views
0
Helpful
0
Replies