Re: QOS to limit download and upload if my network infected by v
i am not an expert but i definitely would suggest to run NBAR on your routers for a couple of days.
It is very easy and you can realise also which kind of traffic you should limit or block from your customers. Before writing QoS policies is a good idea to know which is the traffic to slow prioritise or to drop.
and here is a simple guide for the discovery and the configuration of what you need.
Be careful, you need to read when you ca configure NBAR and where in the network to avoid performaces impact. However it will be simpler than you think!!! Even running only nbar discovery protocol will give you a godd idea of the traffic generated from your users.
After this, you will decide if to implement the policies that NBAR will suggest to you or to create your own policy-map
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...