I'm having trouble getting QoS to work on my router. I'm trying to get traffic from one specific address to be put in the priority queue. I will eventually fine tune this to specific ports but can't understand why this does not work. It does not match against the access list when I specify the address (192.168.1.15) but when match against any it matches meaning that it checks the access list but not working the way I expect it to.
boot system flash:c2600-ik9o3s3-mz.123-26.bin
no aaa new-model
no ip source-route
ip flow-cache timeout active 1
ip dhcp excluded-address 192.168.1.0 192.168.1.149
ip dhcp excluded-address 192.168.1.200 192.168.1.255
Thanks for the reply. I have tried an extended ACL, and also with numbers instead of names and no change. I've also tried between match-any and match-all. I have also tried applying the service-policy to the Ethernet0/0 interface and see the same results. Is there a way to debug class-maps or access-lists to see what address it is trying to match against?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...